Thursday, December 12, 2019

Stay Safe and Keep Employees Safe with Asbestos Management Plans for 2020

2020 is peeping from around the corner and perhaps it may be nudging you to ask if you have proper asbestos management plans in place to keep your property safe and your workers protected.

Safe Work enjoins asbestos management and control

Asbestos is a matter of concern given its high-risk factor. Unfortunately one cannot wish it away. The material is all too pervasive since it was used so widely in construction before the ban came into effect. If your property has asbestos in it in one form or the other you will have to carry out risk assessment followed by asbestos management plans to contain or remove asbestos, whichever is feasible. It is also necessary under the law to maintain an asbestos register and show compliance. It is for your good and for the safety of workers, contract labor and visitors. Engage a professional to carry out the assessment and then prepare and put in place a proper plan to manage asbestos in your property.

Asbestos Management Plans

The plan

A typical plan develops following a risk assessment during which the professional identifies the presence of asbestos, location, type of asbestos, present condition and threat factor. The plan and action under it are contingent on these factors.
  • Asbestos that is encapsulated or otherwise covered with protective coating is relatively safe but then natural disaster or a man-made act may result in breaking of asbestos and dispersal of fibers in the air in which case the plan defines a course of action and control measures.
  • You will need to train workers and other employees on asbestos risks, handling asbestos if it becomes necessary and related safety processes.

The asbestos management plans Nz is not just about staying safe but also an outline for control measures.

Control measures to implement in 2020

Your present situation may be assumed to be safe. However, you never know when accidents happen and expose people to asbestos. The better way going forward in 2020 is to take action under the plan to control or simply remove asbestos wherever practical and feasible.

  • Call in the expert to carry out an evaluation once again. The first priority should be to remove asbestos entirely from interiors wherever practical. It is always better to remove the risk of asbestos rather than live with it and then regret any untoward incident.
  • Failing this your asbestos inspector will assist with better encapsulation, coating or sealing using appropriate materials. This contains and controls the threat.
  • Retrain your employees on safe practices such as avoiding the use of water spray or compressed air on asbestos compounded materials.

You can ignore asbestos and let sleeping dogs lie. However, there is no saying when the dormant threat goes live and by then it may be too late to do anything about it. Take a fresh look at asbestos management plans for 2020 and you will thank yourself.

Wednesday, November 27, 2019

Technical Risk Assessment – All things you need to know?

Companies put their hard efforts in bringing profit and for this, new technologies play an important protagonist. One has to spend millions to prevent IT outages and data breaches. Hence, IT management has to face lots of challenges including low service levels, absence of skills, missing support given by the vendors and integration problems. Depending on the latest technologies, there are many vendors who offer numerous products for different purposes. So, if you are also looking for the Technical Risk Assessment process, this blog will surely help you out is a definitive guide.


Advantages linked with Technology risk assessments

When it comes to the benefits, we must tell you that there are many that you can note down.

  1. Minimizing the cost

It is important to find out the best technologies and this can be done by having access to functional fit. By this, one can easily select the standard from regions and offices. Hence, it becomes easy to cut down the cost while using the technologies.

  1. Decreasing the risk factor

Is it necessary to update the software to the latest version? Well, the answer is obviously yes. Many applications depend on other applications that lead to the establishment of errors. Therefore, it is vital to recognize and understand the existing technologies and their software dependencies.

  1. Boost up the agility

There are many companies who are still battling with the fact of standardization. The situation becomes chaotic when the standards are not defined properly. After setting up the standards, it is essential to follow them properly. As per the experts, surveys play an important role. They work as a tool used for importing all necessary information making the process ready for workplace assessment.

  1. Linking the software and serving the applications

The link between the servers, software, and applications can be prepared by collecting and verifying the data. Later on, one can easily comprehend the dependencies between the objects.

Does technology really affect the business?

We all understand that technology plays an essential role in running a successful business. Likewise, the requirement of technical risk assessment also enhances with time. In short, businesses are doing very well with the introduction of new technologies. Talking about the technical risk assessment, this topic is really broad and complex. All you need is to follow the solution properly. Access Control Assure is a reckoned company that is offering ideal solutions when it is about assessing the risk related to technologies. Not only this, we work in collaboration with the companies to plan and manage the things in a smarter way. Do contact us if there is any confusion related to technical risk assessment.

Tuesday, October 22, 2019

DIY Asbestos Removal or Engage Qualified and Licensed Asbestos Removal Nz Companies?

Assess Control Assure is a licensed and certified asbestos removal agency in New Zealand offering the entire suite of services starting with inspection and ending with safe removal.

Emboldened by online videos that show you how to remove asbestos you may be tempted to take it on. It is a good idea since you can save money but there are risks of asbestos about which plenty has been written online. Should you wish to attempt it then you could follow these guidelines given to you by of the top licensed asbestos removal Nz companies. This is so you know what is involved and whether it is worth the risk in order to save a few dollars.

Asbestos Removal Nz

Pre preparation

Suppose you wish to remove asbestos as part of renovation process. In theory it is simple. You cut away the sections and dump it elsewhere. With asbestos it needs a lot of preparation to ensure not a single fiber gets into the air. Typical preparation is on these lines: 
  • Identify asbestos and check its state – is it loose and easily dispersible, is it crumbly, is it in good condition, etc. 
  • Seal and isolate work areas. If there are ducts and vents, close them. 
  • Create a negative pressure area with the help of negative pressure equipment if the situation warrants it. 
  • Buy and wear head to toe safety wear
  • Keep at hand dry and wet vacuuming equipments
  • Keep ready polythene bags to collect cut and drilled asbestos pieces and dust.

Cutting and dismantling

  • If asbestos is in the interiors you will need to exercise caution when cutting or drilling compounded materials. Use of vacuum suction is necessary to prevent dispersion. Such materials are best wetted so that dry dust is not generated. These precautions must also be followed when working with asbestos containing materials outdoors. 
  • Asbestos that is separated must be put into polythene bags immediately. It is always a good idea to work with wetted asbestos so that dispersion into the air does not take place. 
  • Once work is complete the area must be cleaned with high energy vacuum suction device. Apart from surfaces even the air must be thoroughly vacuumed and refreshed within the premises before it can be reoccupied. WHS regulations stipulate that air and surface sample testing should be carried out in an authorized laboratory. WHS has a model code of practice for this purpose. 
  • Removed material must be transported to a dump site with prior arrangement. 
  • All safety clothing must also be put in a bag and disposed off in a safe way. 

As can be seen from the above it is not a tough task but then, without any prior experience, mistakes are bound to happen. That is one thing. Another thing you will notice is the requirement of special equipments at some stages such as vacuuming, which would be too expensive for one time use. Then there is the matter of arranging permission from a dump site. Reflect on it and you will find that DIY asbestos removal does not save money but can increase risk. It is best left to authorized and licensed asbestos removal Nz company. Assess Control Assure is the asbestos removal company to call in when you want asbestos removed in the safest possible way. You can also have a glance at our website to know more information or feel free to contact us now!

Friday, September 20, 2019

Workplace assessments and its benefits

Workplace assessments if one of the specialized services that aim at observing, reporting and evaluating on all the physical, ergonomic and environmental requirements. This is highly important if you expect your employees to work well for your organization. In this session, a wide range of data regarding the participants will be collected and an idea will be developed for enhancing the wellbeing and overall health of the employees.

The environment will become healthy and happy

The employees might be new or injured, with an assessment, it is possible for certain assessment that will be highly suitable for most of the tasks. With this evaluation, the management will be able to appropriately equip the entire workplace for different types of employees in the workplace.

Lower the risk at the workplace

If the workplace assessment is carried out in a better way, it will serve as the best way for the reduction of any number of problems that predispose to the employees. This will be achieved through the identification of certain common factors and the implementation of certain preventive measures for the issue.

 

Eliminate persistent issues

There are certain situations for the organization that face a persistent problem. In those instances, these assessments can help in determining the root cause. These include employee complaints against any issues and lack of motivation. Thorough workplace assessments can also a bit further and reduce a certain major cause of the issue.

Design some agreeable return for the work plan

With this workplace assessment, it is ensured that the plan will completely match the entire employee and their progressive functional capacity. Certain conflicts will also create some impact in the workplace and formal complaints by the employees. When these are reduced, automatically there will be a good atmosphere in the work environment.

How to start the assessment?
  • There are certain things that you need to focus on when you are starting the workplace assessment.
  • Have great knowledge of what exactly you are going to do and your intention of the assessment
  • There are many different ways to understand the mentality of the employees and make research on them properly
  • Make way how you need to move your assessment and what are the ways for being connected with your process 
Take your step now!

Different companies work under different purposes and strategies. All that you need to do is find the right company for the process. Are you looking for the best company for workplace assessments? We at asses control assure offer you the most reliable service with more experience in the field. Make a reach to use soon through the phone call or contact us at our website for an established successful work environment.